Grey Intermediate Automotive Primer Paint Anti Rust Two Component Quick Drying
Product Details:
Place of Origin: | MADE IN CHINA |
Brand Name: | SHANGFU |
Model Number: | TGM-305 |
Payment & Shipping Terms:
Minimum Order Quantity: | ≥300 Liters |
---|---|
Price: | Negotiation |
Packaging Details: | 4L + 1L set, 3 sets and 1 ctn |
Delivery Time: | 10-25 days from the date of order confirmation |
Payment Terms: | Visa, Paypal, T/T, Western Union, MoneyGram |
Supply Ability: | 25000 Cartons Monthly production |
Detail Information |
|||
Other Name: | Repair Paint Antirust Paint | Color: | Gray |
---|---|---|---|
Type: | 2K Primer | Characteristic: | Excellent Corrosion Protection, Excellent Adhesion On The Surface Of Steel, Aluminum And Zinc Plates |
Application Method: | Spray | Usage: | Car Paint, Appliance Paint, Boat Paint, Plastic Coating, Building Coating |
Adaptive Environment: | No Fire Source, Use In A Well Ventilated Environment | Shelf Life: | 2 Years In Original Sealed Can At Cool And Dry Place At 20℃ |
High Light: | automotive epoxy paint,car primer spray paint |
Product Description
Automotive primer paint 2K two component super quick drying gray intermediate primer good adhesion anti rust paint
Characteristic
A. fast drying speed, 25 ° C after construction, 15 minutes grinding
B. good filling performance, better filling performance in the middle of coating and scraping process than in the middle of general two-component process, and better filling ability for sand mark pinhole
C. The imported resin with good adhesion is selected for excellent adhesion.
D. good grindability
E. higher hardness
F. than normal or midway filling of eye ash has no effect on the gloss of the surface paint (most of the single component primer filled with eye ash and red ash has effect on the gloss of the surface paint).
Applicable surface | All kinds of original coatings, bare steel surface, atomic ash. | Process | 1.Primer sprayed once | ||||||
Not applicable to surfaces | Stainless steel, galvanized steel and aluminium | 2.Flat grinding. | |||||||
Mixing ratio | TGM-305 2K sealing primer: special curing agent for two-component primer : B-136 = 4:1:1.5-2.0 | 3.Scraping atomic ash, repairing defects and polishing. | |||||||
usage time | 20 C for 4 hours | 4.Secondary defect repairing with intermediate coating to guide coating. | |||||||
Spraying equipment and air pressure | 1.4-1.6 mm 3-4 kg/cm gravity spray gun and 1.7-1.8 mm 3-4 kg/cm suction spray gun | 5.Flat grinding. | |||||||
Spray | 2-3 layers can be sprayed | 6.If there is a small amount of defect, repair and scrape atom ash or red ash to polish. | |||||||
Volatilization time | The interval between the two layers is 5-10 minutes. | 7.Medium coating for repairing, whole car guiding coating. | |||||||
Drying time before grinding | 20℃ 5-6 h 60℃ 30 minutes | 8.Clean polishing of the guide coatings on the flat surface. | |||||||
Polish | Dry grinding of P180-P280 before spraying or wet grinding of P400-P600 or P800-P1000 after spraying |
Drying time | 20℃ | 60℃ |
Touching | 10min | 4min |
Tack-free | 12min | 6min |
Sanding | 12hrs | 45min |